Berrys’ Sump Master under pump sumps have exactly the same design principle as our successful Mono Gen 2 tank chambers, fabricated from stainless steel with the pipe entry positions having stubs welded into them so boots can be tightened to both stubs and pipework giving that all important water/fuel tight solution Berrys’ clients have become accustomed to.

Sump Master can be used on pressure applications when additional monitoring is required on the fuel line, alternatively it can be used on conventional suction sites when environmental risks are a concern. The adjustable bracket system allows the installer to position the vertical pipe risers in either suction or pressure positions dependent on the pumping application on site.

The Sump Master system can be supplied fully assembled in the factory with all associated pipework electrofusion welded into position and pressure tested per site delivery.

The Sump Master is constructed in stainless steel to ensure longevity on site in all conditions. The fully assembled product can be vacuum tested as part of a quality control measure to make sure all fittings are both vapour and liquid tight before the site takes receipt of any fuel.

Sump Master from Berrys – part of the ‘plug-and-play’ forecourt equipment range Berrys have now covered all of the 4 pipe connection points on a typical forecourt layout giving its customers fully factory assembled ‘plug-and-play’ products which include Mono Gen 2 , Fill Master, Vent Master and now Sump Master.