Fuel Management System

Featuring INCON™ & FE PETRO™ Turbine Pump Interface

Use this typical 2 Hp system setup diagram to help you place your next order. Combine the INCON™ fuel management system with the FE Petro™ submersible pumping system for total control.

Be sure to download the full size PDF under the “Downloads” tab below.



Containment Monitoring

A TSP-ULS liquid sensor can be used to detect the presence of liquid in a sump – OR – a TSP-DTS discriminating turbine sump sensor or TSP-DDS discriminating dispenser sump sensor can be used to detect both liquids and hydrocarbons.

Tank Inventory Monitoring

TSP-LL2 level probes are hung using the TSP-K4A probe installation kit to provide accurate inventory levels in storage tanks. Select either the TSP-IDF4 float set for diesel tanks or the TSP-IGF4 float set for gasoline tanks. Both kits include a product and water level float. The TSP-LL2 is offered in both leak detection and inventory only configurations.

Turbine Pump Interface

TPI is a standard feature on all TS-550 evo fuel management systems. Simply pair the tank gauge with a controller to take control of your submersible pumps and get features like pump-in-water detection, dry tank detection, tank leveling, clogged intake detection and overfill protection.


A TSP-ULS may be used in both dispenser sumps and tank sumps when a discriminating sensor is not required.

Higher Flow Rates

2 Hp submersible turbine pumps including the STPMVS2-VL2 and STPM200-VL2 come standard with MagShell technology. The pump motor shell is expanded to increase the area around the motor by 45%, resulting in significantly higher flow rates.

Selecting a Controller

When combined with a TS-550 evo fuel management system, both the MagVFC or the STP-SCI can be used to achieve Turbine Pump Interface. Choose between the MagVFC or the STP-SCI.

Leak Detection: Tanks

Statistical Continuous Automatic Leak Detection (SCALD) is a standard feature on T5 Series tank gauges. It allows a site that is continuously open to still perform 0.2 GPH in-tank leak detection tests. This allows you to maintain compliance testing without having to shut down a tank.

Leak Detection: Lines

By adding a TS-LS500 line leak detector, you get highly accurate electronic line leak detection for your lines. The system connects with a T5 Series tank gauge to actually learn the characteristics of each line. This eliminates possible configuration errors and provides unparalleled leak detection accuracy.


Order Info

Equipment List

Description Model
TS-550 evo Tank Gauge (base model) T550EDP
2 Hp Variable Speed STP & Controller STPMVS2-VL2 & MagVFC
2 Hp Fixed Speed STP & Controller STPM200-VL2 & STP-SCI
Universal Liquid Sump Sensor TSP-ULS
Discriminating Dispenser Sump Sensor* TSP-DDS
Discriminating Turbine Sump Sensor* TSP-DTS
Inventory Control Probe TSP-LL2-YYY
4″ Product and Water Level Float Kits See “Select A Float Model” table
4″ Probe Install Kit TSP-K4A
¾” Conduit Entry Boot REB-C-0075
Probe Access Manhole 20URTATG
4″ Flexible Entry Boot FEB-400-F
Line Leak Detection Transducer TS-LS500
  • *TSP-KS mounting kit should be order with these sensors.

Select a Probe Model

Tank Diameter Model
2′ TSP-LL2-29
3′ TSP-LL2-41
4′ TSP-LL2-53
5′ TSP-LL2-65
5’4″ TSP-LL2-69
6′ TSP-LL2-77
6’4″ TSP-LL2-81
7′ TSP-LL2-89
8′ TSP-LL2-101
9′ TSP-LL2-113
10′ TSP-LL2-125
10’6″ TSP-LL2-131
11′ TSP-LL2-137
12′ TSP-LL2-149
13′ TSP-LL2-161
14′ TSP-LL2-173
15′ TSP-LL2-185
16′ TSP-LL2-197
17′ TSP-LL2-209
18′ TSP-LL2-221

Select a Float Kit

Description Model
Diesel TSP-IDF4
Gasoline TSP-IGF4
Phase Separation (Ethanol) TSP-IGF4P
Density Diesel TSP-IDF4D3
Density Gasoline TSP-IGFD3