• Designed to deliver cost-effective environmental compliance test data.
• Easily transported in two supplied carrying cases.
• Easily set-up and programmed with site-specific data and sump identification before a test. Site and test data can also be saved to a laptop.
• Laptop interface optional using System Sentinel™ Tech Software.
• Accommodates up to four probes for testing of up to four spill containers, dispenser sumps, or tank sumps simultaneously.
• Uses magnetostrictive probe technology for unparalleled accuracy and reliable results.
• Highly accurate leak test detects level changes greater than 0.002 inches during the fifteen minute test.
• Provides accurate test fluid levels for each sump monitored.
• Automatically prints out passed or failed test reports in just fifteen minutes after starting a leak test. Printer included.
• Shows the date and time of the test, test fluid levels, and the leak test results on sump leak test reports.
• Additional sump leak test reports can also be printed at the console before other tests are completed.

• Operating temperature:
• Console: 32° to 122 °F (0° to 50 °C)
• Leak test probes: -40° to 140 °F (-40° to 60 °C)
• Storage temperature:
• Console: -4° to 140 °F (-20° to 60° C)
• Leak test probes: -40° to 158 °F (-40° to 70 °C)
• Intrinsic safety rating:
• Leak test probes: Class 1, Div. 1, Group D
• Carry case weight and dimensions:
• Console: 33 lbs. (15 kg), 24″ × 19″ × 8½” (62 cm × 49 cm × 22 cm)
• Leak test probes: 30 lbs. (13.5 kg), 38″ × 18″ × 6″ (97 cm × 45 cm × 16 cm)
• Number of sumps monitored:
• Console: 4
• Leak test probes: 1
• Applicable liquids:
• Leak test probes – testing solution.
• Level units:
• Console – inches.
• Display type and size:
• Console – alphanumeric LCD,
• 2 lines of 40 characters.
• Printer type:
• Console – 24 column thermal printer.
• Power requirements:
• Console – 115 VAC, 50 Watts, 6′ power cord with 3 prong plug supplied.
• Leak test probes – 50′ cable supplied.

Sump Test System Downloads