• Automatically learns exact pipeline characteristics.
• No pipe type and length programming required.
• Monitors flexible, steel and/or fiberglass pipelines in any combination up to certified maximum values.
• Works with submersible pumps generating 25 psi or more.
• Automatically performs 3.0 gph, 0.2 gph and 0.1 gph line tests.
• Positive submersible pump shutdown in the event of a leak.
• Can be monitored through ATG and System Sentinel™.
• Third party certified for 0% probability of false alarm.
• Eliminates the need for factory calibration or on-site field judgments for set-up.
• For use in rigid, flex and rigid/flex piping configuration.
• Immediate notification of alarm condition.
• Allows printed compliance reports.

Console Specifications

• Number of lines monitored: 1, 2, 3 or 4.
• Dimensions: 11″ × 12″ × 4″.
• Power requirements:
• 115 VAC – +15%, -10%, 100 Watts maximum, 1 Amp maximum.
• 230 VAC – +15%, -10%, 100 Watts maximum, 0.5 Amp maximum.
• Operating temperature: 20° to 122 °F (10° to 50 °C).

Leak Sensing Transducer Specifications

• Number of lines monitored: 1.
• Dimensions: 6-1/4″ × 2″ NPT.
• Applicable liquids: motor fuels.
• Power requirements:
• 10 to 20 VDC from console.
• Operating temperature: -40° to 149 °F (-40° to 66 °C).
• Operating pressure: 0 to 100 psi (0 to 689 kPa).
• Belden™ cable: #9363-22 AWG, #9364-20 AWG or #9365-18 AWG.
• Max. sensor to console cable distance:
• 500′ (152.4 M).
• Sensor port fitting: 2″ female NPT.
• Sensor material: anodized aluminum body and stainless steel sensor.
• Intrinsic safety rating: Class 1, Div. 1, Group D, II (1) G [EEX la] IIA T4

Capabilities

• The TS-LS300 performs a 3.0 gph leak and pressure test after every dispense. Upon detection of a failed test, the LS300 will alarm and positively shutdown the affected turbine.
• The TS-LS300 continuously monitors pressurized lines for thermally stable conditions and performs a 0.2 gph monthly and 0.1 gph annual precision leak test during the thermally stable union.
• AutoLearn™ line leak detection technology is also available with the TS-LS500, part of the EVO™ Series 550 and EVO™ Series 5000 fuel management systems.

Approvals

• UL, cUL, ATEX
• Third party certification of leak detection capabilities

TS-LS300, 115 VAC 50/60 Hz Models

Intrinsically Safe

For new installations where separate low voltage conduits can be used.

• Note: All AutoLearn™ models include the TPI turbine pump interface module.

TS-LS300, 230 VAC 50/60 Hz Models

Intrinsically Safe

For new installations where separate low voltage conduits can be used.

• Note: All AutoLearn™ models include the TPI turbine pump interface module.

Interface Cable

For connecting two AutoLearn™ consoles together.

Alternative Fuels Accessories

TS-LS300 Downloads