• Automatically learns exact pipeline characteristics.
• No pipe type and length programming required.
• Monitors flexible, steel and/or fiberglass pipelines in any combination up to certified maximum values.
• Works with submersible pumps generating 25 psi or more.
• Automatically performs 3.0 gph, 0.2 gph and 0.1 gph line tests, as well as other line pressure checks.
• Includes the industry’s only statistical line leak detection (SLLD).
• Positive submersible pump shutdown in the event of a leak.
• Optional feature of T5 Series fuel management systems.
• For use in rigid, flex and rigid/flex piping configuration.
• Intrinsically safe and explosion proof options.
• Dispenser hook isolation and turbine pump interface (TPI) pump control options.
• Remote access to line pressure, test, and alarm information.
• Generator versions to prevent shut-down of critical systems (TS-ELLD-G software required).

Specifications

• Dimensions: 6-1/4″ × 2″ NPT.
• Operating temperature: -40° to 149 °F (-40° to 66 °C).
• Operating pressure: 0 to 100 psi (0 to 689 kPa).
• Belden™ (*) cable: #9363-22 AWG, #9364-20 AWG or #9365-18 AWG.
• Max. sensor to console cable distance: 500′ (152.4 M).
• Sensor port fitting: 2″ female NPT.
• Sensor material: anodized aluminum body and stainless steel sensor.

Capabilities

• Performs a 3.0 gph leak and pressure test after every dispense cycle or 45 min. Positive shutdown of the affected turbine(s) on test failure.
• Performs a 0.2 gph monthly and 0.1 gph annual precision leak test during the thermally stable periods of ne dispensing. Optional positive shutdown of the affected turbine(s) on test failure.
• Performs Pressure up, Catch pressure and other additional checks. Alarm only on test failure.

Approvals

• TS-LSU500 UL, cUL, ATEX, IECEx
• TS-LSU500E UL, cUL
• Third party certification of leak detection capabilities

T5 Series Specifications

• Number of lines monitored: 8 (48*)
• Dispenser hook input channels: 12 (72*)
• STP control Relay output channels: 8 (50*)
• Turbine Pump Interface STP control with FE Petro intelligent controllers
• Applicable liquids: Gasoline, diesel, aviation fuels

• * Maximum number when including additional options

Minimum Console Requirements

• TS-550/5000, EVO™ 550/5000 Fuel Management System
• TS-ELLD software options (TS-ELLD-G software option for generator-specific applications)
• TS-ACI, TS-420IB or TS-420EXP, TS-RLY Modules

• * TS-RLY module is not required when utilizing turbine pump interface (TPI) communications

Intrinsically Safe

For new installations where separate low voltage conduits can be used. Use TS-420IB module.

• Each kit includes a leak generator needle valve kit (P/N TS-AFALNIP) required for installation.

Explosion Proof

For retrofit installations where only a high voltage conduit can be used. Use TS-420EXP module.

• Each kit includes a leak generator needle valve kit (P/N TS-AFALNIP) required for installation.
• Note: Using turbine pump interface (TPI) communications eliminates the need for a TS-RLY module; FFS intelligent controllers required.

Installation Accessories

TS-LS500 Downloads